NO LONGER AVAILABLE.
SG#155
Equipped as follows:
Carton folder gluer
CUBE adjusting system
Carton board: max 800 g/m2
Corrugated flute type: N, E, F
Speed: 20 to 300 m/min
Inching speed: 20 m/min
Box sizes:
- Straight line “C”: 126 to 760 mm
- Straight line “E”: 60 to 800 mm
- Straight line “L”: 60 to 215 | 385 | 515 mm
- Crash-lock bottom “C” (2): 146 to 760 mm
- Crash-lock bottom “L”: 70 to 385 mm
FEEDER Total length: 610 mm.
6 Feed conveyors with 30 mm wide belt with 4 built-in mechanical vibrators.
1 Thickness gauge with lateral and lengthwise setting and upper introduction rollers
1 Additional thickness gauge with lateral and lengthwise setting and upper introduction rollers
2 Side guides in two parts
Asymmetrical and adjustable in length
Max. pile height: 350 mm.
1 set of rear guides for blank support
1 Motor controlled by frequency variator to drive the feed belts and to put in or out of operation
PREBREAKER SECTION total length: 2300 mm.
1 lower left conveyor with 43 mm wide belt.
1 Lower right conveyor with 25 mm wide belt.
1 Set of upper conveyors with 25 mm wide belts and lifting device.
1 Left-hand prebreaker without belt with built-in pressing device
Adjustable through eccentric
Max. width of the glue flap: 30 mm
1 Reopening guide
1 Right-hand prebreaker with 30 mm belt width
Including a system to set the prebreaking angle
1 Lower central supporting guide
GLUING UNIT
1 Lower left-hand gluing unit with wheel and double scraper.
1 Removable glue basin
1 Upper guide with pressure roller
1 Refill bottle
