***Personally print tested and inspected by SGE. See videos below!***
This Komori LS640+CX has nearly every ‘bell and whistle’ that a packaging printer could ever want. Dual UV and IR drying systems (see below), skeleton transfers, raised 450mm, stub dryer and more. We recently spent two days performing a thorough inspection and print test with a factory Komori technician. The press prints exceptionally well. Cylinders are clean. We can provide a turn-key installation on this press with the utmost confidence. Call or email us to discuss your level of interest. This press will certainly sell quickly.
- Just 76mm impressions*
- 28 x 40 inch six-color format
- Dedicated tower coater with extended delivery
- Tresu Anilox coating system with chambered doctor blade
- Press raised 450mm with bandstand height catwalks
- Skeleton transfers
- Up to 1mm stock thickness
- Hybrid UV/IR press – Nordson dual UV/IR system
- 2 interdeck modules movable between 1-5, Stub (DU) after unit 6 with 2 UV blubs and 2 bulbs in delivery
- PQC console for ink and register
- PDC-SII for closed loop scannning
- KHS-AI
- KMS-IV monitoring
- AMR for paper presets
- Komorimatic continuous film dampening
- S-APC
- Automatic roller wash
- Automatic blanket wash
- Automatic impression cylinder wash
- Technotrans beta.C for ink temperature control and solution R&R
- Technotrans alpha.V for coating circulation – dual systems for UV and aqueous coating
- IR dryer with hot air knives
- Grafix powder spray
*(Counter reset approximately 11mm impressions ago when totalizer was circa 65mm)
