NO LONGER AVAILABLE.
- Speed 9,000 p/h
- Size 76 x 106 cm (30” x 41 ¾”)
- Platform with safety barrier
- C.U.B.E. Bobst-Electronic machine operating system
- JOB CARD system for saving the data for repetitive jobs on microchip
- Machine configured for BOBST VIEW system.
- Centerline system for quick job changeover
- Electronic device for sheet travel control
- Main motor with frequency converter control
- Feeder
- Manual non-stop device.
- Automatic lateral shifting of pile tray
- Up to +/- 50 mm, with feedback from the POWER REGISTER.
- Synchronization of the sheets arrival
- Automatic, with feedback from the POWER REGISTER
- Continuous pile raising whilst maintaining a constant height for the top of the pile
- Suction unit with multiple adjustments
- Feeder enabling adaptation of Automatic Pile Transfer (APT)
- Alignment flap in 3 sections (the 2 external ones are adjustable in height)
- Feed Table
- Power Register
- Device ensuring registering without sheet edge contact : either in relation with the sheet edge or in relation with print register
- Double sheet detection with automatic calibration
- Upper transport equipment for paper, paperboard and microflutes
- Laterally guided transport belts
- With lateral guidance and automatic tension system
- Platen Press
- Small stroke movable platen, controlled by a movement of the cams.
- Upper vacuum beam for the chase
- Oil conditioning unit to ensure diecutting stability
- Programmable oil preheating system
- Automatic equipment centering and locking for chase and supporting plate
- Motorized cutting force setting
- Adjustable centerings for supporting plate
- Micrometric screws allow fine adjustment of the cutting plate with respect to the die. The total range for adjustment is +/- 0.7 mm both lengthwise and crosswise
- 1 Set of 10 thin plates, thickness 1mm (E-95)
- 1 Steel perforated supporting plate, thickness 12 mm, adapted to vacuum system (E-57)
- Waste Stripping Station
- Sheet braking device using the Bernoulli system
- Central quick locking pull-out frame
- Quick locking device for upper tool integrated in the machine
- Adjustable centering on all equipment (upper, central and lower)
- Dynamic blocking of upper tool in upper position
- 1 Adaptation equipment for upper stripping die (quick locking) (F-35)
- Allows wooden stripping form fastening in the upper quick locking device integrated in the machine
- 1 Adaptation material for stripping board on the central pull-out frame (quick locking)
- Stripping board adaptation to mount it on the central pull-out frame (quick locking)
- Pile Delivery Station
- Automatic binder sheet inserter with electrical sheet presence control
- Automatic selection of suction cups according to sheet size
- Continuous pile lowering whilst maintaining a constant height of the pile
- Automatic variable height non-stop rack
- Waste or skeleton removal apron
- Braking brush of the waste skeleton
- Motorized
- Automatic pallet changing device compatible with APT (Version 10)
- Automatic jogger length control
- Sheet braking device using the Bernoulli system
- Quick locking device for upper tool integrated in the machine
- Adjustable centering on all equipment (upper and lower)
- Dynamic blocking of upper tool in upper position
- 1 Fastening material for an upper dedicated tool for quick lock (H-27)
- To lock a wooden blanking tool with upper quick locking device integrated in the machine
- 1 Universal lower tool (H-6)
