NO LONGER AVAILABLE
Equipped as follows:
- 4/4 Perfector
- Max sheet size: 29.13” x 40.94” straight, 28.35” x 40.94” perfect
- Min sheet size: 13.39” x 18.90” straight, 13.39” x 18.90 perfect
- Stock range: 0015 to .024 straight, 0015 to .16 perfect
- 15,000 SPH straight, 11,000 SPH perfect
- Power Plate Loading (PPL) – Semi-automatic plate loading or manual “Quick Release” plate clamps with central pre-tightening
- Factory installed pin register system (Grapho Metronic)
- Unitized design with double sized transfer and impression cylinders
- Markless transferter system with vacuum or blast air bed to control sheet during transfer
- Image diagonal register adjustment through cocking transfer drum ±.008″ on operators side from
- console
- Motorized impression cylinder adjustment from console
- Automatic cylinder positioning for plate mounting and 360 degree rotation ability with zero position
- index bolt (not available on PPL equipped press)
- Digital remote running register control from console with ±.040″ adjustment in lateral and
- circumferential directions
- Blanket washers with 10 programmed cycles, selectable from consoleRoland-Mabeg continuous stream feeder with 46-1/2″ stock capacity Motorized positioning of feeder
- head and side stops adjustable from console Steel platform for quick pile change with motorized pile
- alignment
- Double sheet detector
- Stainless steel vacuum feed board with two speed suction tapes and rotary suction devices for infeed to headstops
- Nylon guide rollers on top of headstops
- Bernoulli nozzles at headstops
- Nine headstops adjustable on the run for gripper margin and parallel
- Vacuum side guide with purging and 1 /2″ pulling range adjustable from console Cardboard guide
- plate over side guide
- Computerized optical trend indicator with electronic side guide and double sheet detectors
- automatically checks feeder timing
- Electro-pneumatic locking of front guides
- Pre-gripper infeed to transfer drum
- Four ink form rollers, each with adjustable axial travel and micro adjustment to plate
- Infinitely adjustable ink ductor dwell time from console with continuously rotating fountain roller
- Remote controller inking system with self-aligning linear ink slides and zonal control from console
- Hand-held computer terminal for in-house periodic calibration Automatic roller wash-up devices with
- 10 different programmed cycles Automatic ink roller separation on press stoppage for faster start-up
- Adjustable ink vibrator stroke and timing from console
- Roland Deltamatic continuous five roller integrated dampener (controlled from console)
- Delta effect, switchable from console, with 8% form roller speed reduction
- Skewable system from operator side
- Inker/dampener integration switchable from console depending on job requirements (Integration not possible in Delta mode)
- Continuous delivery with steel platform and 42-1/2″ stock capacity Back stop, side joggers and sheet drop motorized and adjustable from console Manual, retractable board holders Integral sheet decurler
- Bernoulli sheet guide with 8 vacuum slow down rollers Blow down bars, adjustable in pairs Blow down fans
- Speed compensated delivery air
- Sheet guide track to delivery with vacuum or air blast control of sheet
- Automatic control and monitoring of lubrication for all operating parts under guards and delivery chains
- Press inoperative with oil pump malfunction
- Thyristor controlled DC drive system with speed regulation by tachometer feedback control and rive transmission from outside press
- Digital programmable control of all important press functions from console and fibre optic data transmission
- Monitoring and service diagnosis of all drive and electrical sections from console
- Console Components Color monitor
- Foil key board
- Remote control of ink zones (RCI) Job card reader
- Color matching light.
- Process computer with hard disc for storage of repeat jobs and data. Operation and machine data acquisition User-friendly arrangement of components
- Automatic sheet size from the console for (i.e.) suction head, sheet stops, feeder/delivery, pneumatic sidelay
- Automatic setting for stock thickness from the console for (i.e.) lay hoods, and impression setting between blanket and impression cylinders
- Suction roller and lateral sheet guide setting to the required sheet size.
- Remote control of lateral, circumferential and diagonal register (Transferter)
- Automatic PPL program sequence controlled from the console
- Presettable run counter (automatic press stop when run completed) Monitoring of automatic lubrication
- Program preselection for the automatic washing devices Service function for the electric’s
- Function control and display of guards and other safety devices. RGI-integrated into PECOM console
- Monitoring of the entire electronic system with registration and fault message display on the monitor, with description, at the central command console
Speed indication and speed pre-selection. Comfortable operation of each unit i.e. make-ready. Plate cylinder positioning - Automated production start-up. Programmed/switched control for inking and dampening units
- Programmed sequential pneumatic impression on/off
- Control and display of dampening solution condition
- Optical trend display of the feeder
- Setting of sheet guide track with controlled fans
- Setting of ink slides as well as all positioning servos via hand held terminal
- Setting values are stored in a parameter memory
- Many spare parts
- Optional Tech Lighting coater (UV) available for additional cost
- Circa 162 million impressions (verified)
