NO LONGER AVAILABLE.
2009 Bobst Expertcut 106 LER
REF# 185870
Equipped as follows:
Hours – 29,000
Smart feeder
Machine compatible with HIGHWAY TDF-VIEW system.
Centerline system for quick job changes
Electronic sheet flow control
Adjustable centering on the stripper and on the delivery
Control cabinet air conditioning
Several automated functions to assist the machine operator including:
Controlled machine stop after request failure (allows the in to process the sheet in the machine without interference).
Feeding a sheet from the feeder to the stripping station
Checking the punching I creasing.
Feeding a sheet into the stripping or blanking station for
Check the tool position, if necessary.
Programmed machine stop for equipment replacement (Change of job).
Bobst-Electronic machine operating system C.U.B.E. 3 (Control Unit Bobst
Electronic) with touch screen.
The central Bobst C. U.B.E. 3 control enables that Machine operators, the machine functions and elements of the machine easy to understand with the help of various menus, to retrieve and to supervise.
Main drive by frequency-controlled asynchronous motor
The Smartfeeder includes:
– Independent feeder controlled by an electric shaft.
– Optical page register control.
– Automatic lateral stack correction (+/- 40 mm) controlled by the optical side register.
– Automatic synchronization device for optimal application of the Bow to the front lays.
– Electronic deceleration device (3rd Speeds for placing the sheets on the front lays).
Infinitely variable stroke of the stacking plate to keep the
Stack height.
Adjustable side blower
Suction head with multiple adjustment options.
Cutting:
Movable crucible with short stroke and cam drive.
Cam-controlled crucible movement allows an arch transfer with lower acceleration and deceleration.
Crucible with constant parallelism over the entire pressure range.
Upper crucible with vacuum.
Grapple reopening device.
Automatic centering and locking of the locking frame and the Production plate.
Adjustable centering for the base plate (+/- 0.9 mm).
Block the closing frame against the upper crucible.
Measure the punching force with a tension gauge.
Motorized adjustment of the punching force.
By push button.
Base plate made of synthetic material.
12 mm thick.
A set of 5 thin plates, 1 mm thick
1 Upper quick release clamping frame: screwed base plate (E-3)
Base plate, 2 mm thick, with a synthetic protective plate, 1 mm thick.
1 compensation plate (E-5) 4 mm thick. This ground steel plate is for the
Use of thin punched sheets necessary. Favorable for Repeat jobs.
Stripping Station
Middle drawer frame with quick release.
Integrated quick tool system
BOBST Integrated quick release device for a machined upper
Break-out tool.
Adjustable centering for the upper, middle and lower Stripping tool.
1 Fastening material for the top stripping form for quick clamping
Allows a wood breakout mold to be attached to the machine
Integrated upper quick release device.
1 fastening material for the stripping board on the central frame with quick release
1 lower drawer frame
1 lower breakout equipment
Waste removal equipment with support bars and telescopic pins.
Blanking/Delivery
Automatic separator sheet inserter with drawer sheet magazine and electrical control of the sheet supply.
Depending on the format of the intermediate sheets, the necessary transport suction device activated.
Constant lowering of the stack.
Stepless lowering movement of the pile support plate with constant Stack-high control.
Automatic pallet changing device.
Automatic non-stop rake.
Safety device for the stack lifting movement.
Waste transport carpet for the gripper edge or the rest of the grid.
BSSR – integrated quick release device for a finished upper Depaneling tool.
Adjustable centering for the upper and lower Depaneling tool.
Lower drawer frame with fastening material
Allows a blanking mold to be attached to the integrated upper quick / clamping device.
