NO LONGER AVAILABLE.
2016 Bobst Novacut 106
REF# 186319
Equipped with the following:
- Device Centerline for ii quick change of work
- Device Electronic for ii control of the passage of sheets
- Centering adjustable to the station of extraction
- Air conditioning for the ‘ closet Electric
- System C . U . B . And . 3 (Control Unit Bobst Electronic) with touchscreen in color for the management of the machine
- This system , managed by a microprocessor and developed by B or bst , allows all ‘ operator to easily conduct the mac c china , of visual control / are the different functions and el and minds de / the machine
- Main motor with frequency variator
SHEETER
- Counter -carrier stack with lateral correction manual of the stack during the production the one
- Synchronizer of sheets to adjust to ‘ stop the ‘ arrival of sheets to register
- Control of the ‘ height of the stack of sheets via leg feeler
- Guide stack back (wire side and the side opposite conductor)
- Blowers side adjustable with references Centerline
- Group d ‘ aspiration
- System of security for the descent of the platform door – stack
INTRODUCTION TABLE
- Covered by a sheet antistatic in stainless steel
- introduction to the table of the sheet feeder with r sweeping lateral
- 4 Front registers adjustable in pairs, with control of the presence of the sheet
- Team guy l ato conductor adjustable with references Centerline, with control of the presence of the sheet
- “Double sheets” detector
- Tablets of entry of the die cutter
- Shoot down-sheet ( Guide of introduction of sheets in the clamp )
- Frame top with a device for lifting manual
- Equipment of transport higher for paper , paperboard and cardboard corrugated
- Straps for Transportation
PLATINA
- Device of reopening of pliers
- Centering and closing equipment of diecutting
- Automatic closing of the frame towards the upper block
- Measure of the strength of diecutting through calibration of load plate-support material sintet the co
- Spess hours 23.5 mm
STATION OF EXTRACTION
- Device of fixing rapid of tavola central
- Motorized lifting of the upper frame
EXIT
- Battery carrier platform Front jogger
- Joggers side and rear adjustable with references Centerline
- Brush the braking
- Manual Non-Stop grid
EQUIPMENT
- 1 plate of cutting (T-120.001)
- 1 frame to the drawer top of extraction (T-200.001)
- 1 Equipment top of extraction (T-205 001)
- Equipment necessary for / the realization of an extraction tool , including bars , fixing brackets , extractor holders and a series of extractors of 3 , 5 and 10 mm in diameter .
- Material of fixing for the tool of extraction (T-205 002)
- Comprising bars , brackets for fixing
- Adaptation material of the extraction table on the central quick- closing cassette frame
- Frame drawer bottom extraction (T-230 001) Equipment bottom of extraction
- Equipment for the extraction of trimmings, compression and bars and needles telescopic
COMPLIANCE WITH STANDARDS AND SAFETY
- The die cutter Autoplatina ® Novacut 106-E and conforms to the Guidelines European
- for the essential rules of safety and health relative to the design and construction and the standards American UL and NFPA regarding the equipment industrial
Emergency stop
- Device of protection operator
- Displacement of the train-chain coupling
- Blocking device of the train-chains
- Handling equipment for die cutting