NO LONGER AVAILABLE.
Equipped as follows:
Circa 226 million impressions
The minimum sheet size is 200 x 296 mm
The maximum sheet format is 585 x 750 mm
Maximum print format 575 x 740 mm
The thickness of the printing substrate is 0.04 – 0.4 mm
Printing speed 15,000 sheets / hour
Printing plate dimensions 635 mm x 754 (745) mm
Printing plate thickness 0.3 mm
Machine power consumption: max 62 kW
Dryer no.1: max 82 kW
Dryer no.2: max 36 kW
Total maximum power consumption: 180 kW
Application height 900 mm
Delivery height 900 mm
Machine width 2.930 mm
Machine height 1,857 mm
Machine length 12,420 mm
1 mm longitudinal register in each direction
Circumferential register 2 mm in each direction
Mowing with a printing plate of 0.6 mm of the skew on both sides of the plate
Stretching the board with the front clamp 0.5 mm
Number of printing units 6
Number of varnishing units 2 pieces (2gum each, printing unit 1 unit
and at the end of the machine 2nd team)
Number of drying units 1 piece (after the 1st coating unit)
Dryer no.1 Baldwin IM16 on the drying unit,
Blow-in power 48 kW
Max. IR power 18.4 Kw
Total power: 82 kW
Blown air: 2500 m3 / h
Exhaust air: 4000 m3 / h
Dryer No. 2 by Baldwin GS4 (36 kW) on the lining of the machine
Blow-in power 6.5 kW
Max. power IR 36 Kw
Total power: 48 kW
Blown air: 900 m3 / h
Exhaust air: 1600 m3 / h
Automatic roller washing systems. Roller washing by means of a doctor blade
Automatic blanket washing systems washing blankets by using a roller
Porous
2 pieces of humidifying solution coolers – BALDWIN model type. NM 2.0-
The most modern model equipped with
PH meter
Print management systems CIP station 3
TABLE OF PRE-COATING
reduction of waste paper
organ time reduction
print management
ink profiles
Variable foot thresholds 3 ranges of foot threshold changes:
0.04-0.2 mm
0.2-0.5 mm
0.5-0.8 mm
Detailed equipment:
Digital command and control system
• Omron PLC model CS1
• SH 2010 type De Luxe operating console
• Remote digital control of the ink sectors
• Remote digital humidification control
• Gray electric with cooling fans
• Inter-team buttons mounted so that the operator can easily move between teams
Stream feeder
• Vacuum table runoff
• Deionization system to collect electrostatic charges built into the feeder head
• Electronic console for accessing brands
• Electronic control of the attracting brand
• Ultrasonic double sheet inspection (dual range ultrasonic sensor with automatic calibration)
• Electromechanical double sheet control (mechanical sensor equipped with electronic optical
detector)
• Optoelectronic sheet skew sensor
• Air sheet separator
• Front brand area lighting
The body and printing units
• Monolithic foundation of the machine body
• Double diameter transfer cylinders
• Mounting rail for manual adjustment of the printing plate
• The machine cylinders are protected against corrosion
• Electromechanical sheet thickness setting for each printing unit independently by SH 2010
• System of compensation of the phenomenon of stretching the edge of the sheet of paper
• Ink cartridge knife and seals between sectors
• Inkwell plate in vertical position
Inking units
• Ink unit: 19 rollers, including 4 suitable for conventional printing
• Rilsan coated self-oscillating grinders
• Oscillating ink rollers with adjustable range and oscillation turning point
• Independent switching on and off of the inking unit for each printing unit
Dampening units
• Baldwin humidifier control panel
• Pneumatic delivery and parking of the moistening rollers
• Sector air knife to prevent the phenomenon of emulsification
• Roller for the production of a film of moisturizing fluid with adjustable pressure and mowing
• Independent switching on and off of the humidification system for each printing unit
• Moisturizing mixture level sensors in inkwells
In-line coating unit No. 1
• Doctor blade with anilox roller
• A drug circulator adapted to metallic paints with tempering
• Automatic cleaning system for doctor blade chamber and anilox roller
• Anilox roller – 1 piece
• Coating unit cover broken in one place
In-line coating unit No. 2
• Doctor blade with anilox roller
• Varnish circulator adapted to dispersion varnishes
• Automatic cleaning system for doctor blade chamber and anilox roller
• Anilox roller – 1 piece
Drying unit
• Drying unit with transfer cylinders enabling the sheet to be transferred and dried at the same time
• Stiffening of the unit cover enabling the operator to sit on the unit when changing polymers on the
coating unit
• Heat-resistant clamps in the cylinders in front of, behind and on the drying unit
Delivery
• Touch screen for operating the machine
• Control of adding and setting out of the ink system rollers
• Control of adding and leaving the water system rollers
• Switching the pressure on and off
• Grafix camera
• Print speed indicator
• Control of disc change programs
• Machine mileage counter
• High pile delivery
• Deionization system
• Brake of sheets on delivery
