UPP#337
Equipped as follows:
- PQC: console for ink
- Axial, circumferential diagonal remote control
- AMR (Automatic Make Ready): automatic preset for pressure, paper size and thickness setting, KMS : Komori Management System
- KHS : Komori High Performance System
- Pre-connected to CIP3
- PDC : Auto Tracking Color Control
- Pile alignment on feeder
- Micrometric adjustment of the lateral pull pay by touch panel +/- 3 mm
- Optical fiber precision photocell system for front and side control + safety photocell for the sheet in advance
- Paper deformation compensator placed on the infeed cylinder with remote control, Mechanical sheet stop in case of misregistration or crooked sheet
- Feeler foot with double ionizing antistatic blower: for a good sheet separation on the back side of the pile
- Antistatic on feeder
- Preloader on feeder
- Double sheet electronic detection
- Speed Reduction: dampening roller with reduced peripheral speed
- Komorimatic damping
- Technotrans Beta.c 200 ink temp control combined with damping refrigeration + Automix
- FAPC fully automatic plate change
- Inks de-clutching device on 1° and 5° printing units
- Automatic roller wash-up device
- Automatic blanket washers with cloth
- Automatic impression cylinder washers with cloth
- Skeleton Transfer cylinders with manual adjustment movement
- pick-up pad grippers with vacuum system
- Double diameter impression cylinders
- Varnishing unit, Tresu chambered doctor blade system, with anilox roller
- TRESU AQUA L10 Coating Circulator
- Extended delivery 2 meters
- Grafix Digitronic powder spray
- IR/HOT AIR GraphiSet4 IVT Baldwin dryer
- Non-Stop in delivery
- Perimeter sensors in delivery
- Antistatic in delivery
- Speed: 15,000 SPH (sheets/hour)